Impulse spray valve for dosing industrial lubricants in a spray film
The SOMA impulse spray valve (ISV) enables technical and industrial lubricants such as grease and oils to be applied homogeneously as a flat spray film: reliably, flexibly, precisely.
Technical data – Impulse spray valve
An overview of the most important technical data for the SOMA impulse spray valve.
| Technical data | ISV |
| Dimensions (L x W x H): |
80 mm x 100 mm x 216 mm |
| Dosing medium: |
NGLI 1 - 3 (Checked by SOMA customer service) |
| Static system pressure: | 0.5 - 12 bar |
| Dosing frequency (fmax): | 20 Hz |
| Dosing volume IDV2: | 1.5 - 18 mm³ / dosing pulse |
| Dosing volume IDV3: | 5.0 - 45 mm³ / dosing pulse |
| Dosing medium hose: | Ø 8 mm, Ø 10 mm, Ø 12 mm, length depends on the dosing medium |
| Dosing nozzles: | 0.4 mm / 0.6 mm / 0.8 mm / 1.0 mm / 1.2 mm / 1.5 mm / special nozzles |
| Air pressure: | 4 - 7 bar |
| Air quality: | Dried, filtered and non-lubricated air |
| Air consumption: | 15 l / min. |
| IDV supply hose: | Ø 4 mm, length < 300 mm |
| Hose piston return: |
Ø 4 mm |
| IDV-PV supply hose: | Ø ≥ 6 mm |
| IDV heater (optional) Supply voltage: |
24 V |
| IDV heater (optional) Temperature: |
max. 110 °C |
| Operating air temperature: | + 15 ° C to + 40 ° C |
| Operating humidity: | < 75 % (non-condensing) |
| Noise level: | < 70 dB(A) |
Service performance as the key to success
Your requirement is our challenge
